Ultra-flexible blade solutions for SDN/NFV deployments

Posted By : Alex Lynn
Ultra-flexible blade solutions for SDN/NFV deployments

5G networks are anticipated to revolutionise future networking capabilities with much enhanced performance, throughput, bandwidth and much shortened latency. Since the fundamental infrastructure of 5G lies in the distributed edge computing, Lanner is introducing next-generation networking hardware to empower the flexibility, agility, low-latency data processing and analytics at the edge to enable 5G applications for service providers.

To meet the carrier grade platform design, Lanner’s HybridTCA converged appliances meet the following requirements: nebs and fips compliance, full redundancy, high availability, hot plug and hot swappable I/O blades, and rich IPMI manageability

HTCA-6200
High Availability Chassis 2U Telecom Network Appliance with two x86 CPU Blades and two I/O Blades.

  • High availability, full redundancy and extreme high performance.
  • Two CPU blades in the rear, per blade supports up to two Intel Xeon E5-2600 v3/v4 CPUs and 16x DDR4.
  • BCM StrataXGS Trident-II/II+ BCM56854/56860 Switch Fabric with 720/1280Gbps.
  • Two swappable I/O blades in front, supporting up to two switch blades or Ethernet blade configuration.
  • Redundant power supply and removable fan module.
  • NEBS compliant design.

HTCA-6400
High Availability Chassis 4U Telecom Network Appliance with four x86 CPU Blades and four I/O Blades.

  • High availability, full redundancy and extreme high performance.
  • Four CPU blades in the rear.
  • Per blade supports up to two Intel Xeon E5-2600 v3/v4 CPUs and 16x DDR4 R-DIMM.
  • BCM StrataXGS Trident-II/II+ BCM56854/56860 Switch Fabric with 720/1280Gbps.
  • Four Swappable I/O blades on the front, supporting up to two Switch blades or four Ethernet blades.
  • Four swappable 3.5” HDD bays.
  • NEBS compliant design.
  • Redundant power supply and removable fan module.

HTCA-6600
High Availability Chassis 6U Telecom Network Appliance with six x86 CPU Blades and six I/O Blades

  • High availability, full redundancy and extreme high performance.
  • Six CPU blades in the rear, per blade supports up to two Intel Xeon E5-2600 v3/v4 CPUs and 16x DDR4.
  • BCM StrataXGS Trident-II/II+ BCM56854/56860 Switch Fabric with 720/1280Gbps.
  • Six Swappable I/O blades on the front, supporting up to 2x Switch blades or 6x Ethernet blades.
  • NEBS compliant design.
  • Redundant power supply and removable fan module.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona