Rohde & Schwarz GmbH & Co. KG

Address:
Mühldorfstraße 15
München
D-81671
Germany

Phone: +49 89 418695-0

Fax: +49 89 404764

Web: http://www.rohde-schwarz.com

Rohde & Schwarz is one of the world's largest manufacturers of electronic test and measurement equipment. Our products set standards in research, development, production and service. As a key partner of industry and network operators, we offer a broad spectrum of market-leading solutions for the newest wireless technologies as well as for RF and microwave applications up to 500 GHz.


Rohde & Schwarz GmbH & Co. KG articles

Displaying 1 - 20 of 140

End-to-end 5G NR network solution goes to 30GHz

End-to-end 5G NR network solution goes to 30GHz
A commercial 5G NR network measurement solution has been unveiled by Rohde & Schwarz. A combination of the R&S TSME30DC downconverter and the R&S TSMx6 network scanner analyses 5G NR signals up to 30 GHz, covering the majority of high frequency 5G NR use cases.
17th April 2019

Duo deliver successful 5G NR FR1 signalling test

Duo deliver successful 5G NR FR1 signalling test
A non-standalone 5G NR FR1 signalling test has been performed by Rohde & Schwarz and OPPO. The OPPO 5G smartphone was powered by the Qualcomm Snapdragon X50 5G modem and RF frontend solutions. The test was carried out using an R&S CMW500 wideband radio communication tester and the R&S CMX500 5G NR signalling tester from Rohde & Schwarz.
16th April 2019

Spectrum analysers aid 5G test, speed time to market

Spectrum analysers aid 5G test, speed time to market
Manufacturers of RF components, transmitters and modules are facing complex measurement tasks on wideband RF signals and tight time-to-market requirements, says Rohde & Schwarz. With the advances of 5G NR technology, engineers need to analyze wireless communications signals in R&D and production with test solutions supporting 5G bandwidth and RF requirements.
11th April 2019


Test package for C-V2X modules wins GCF approval

Test package for C-V2X modules wins GCF approval
Approval for its cellular vehicle-to-everything (C-V2X) protocol conformance testing package, fulfilling the specification defined by the Global Certification Forum (GCF) has been announced by Rohde & Schwarz. The approval is based on tests executed using the R&S CMW500 wideband radio communication tester and R&S SMBV100A vector signal generator. 
8th April 2019

Duo demonstrate 5G NR standalone verification

Duo demonstrate 5G NR standalone verification
Test and measurement specialist Rohde & Schwarz and Prisma Telecom Testing have successfully completed the verification of a 5G NR standalone registration including data transfer. While initial 5G New Radio deployments will focus on a non-standalone (NSA) mode, which always requires an LTE connection as anchor, the next step will be deployments in a standalone mode (SA).
15th March 2019

Test software upgrade verifies Bluetooth 5.1 performance

Test software upgrade verifies Bluetooth 5.1 performance
Hard on the heels of Bluetooth SIG ratifying its core specification version 5.1 in late January, Rohde & Schwarz is now launching the first test solution as a software upgrade for the R&S CMW test platform. The test solution for Bluetooth 5.1 can be used to verify the performance of the location services that have been significantly improved with the new Bluetooth specification.
27th February 2019

Hand-held instrument packs in field test demands

Hand-held instrument packs in field test demands
Field engineers often need multiple instruments to perform antenna installation and maintenance tasks: a cable and antenna analyser, a spectrum analyser, a signal generator and a bias source. Rohde & Schwarz now enhances its R&S Cable Rider ZPH portfolio with a two-port model, which combines all of these instruments plus additional features into one powerful hand-held unit ideal for use in the field.
25th February 2019

Software suite aids 5G data analytics

Software suite aids 5G data analytics
With the rollout of technologies such as IoT and 5G, mobile network operators need to overcome the challenges of increasingly complex air interfaces and demanding use cases in order to deliver the required quality of experience (QoE) to end users.
23rd February 2019

5G NR tester set for Mobile World Congress debut

5G NR tester set for Mobile World Congress debut
Most network operators will implement 5G New Radio (NR) as an extension of their existing LTE mobile network (NSA). As a result, mobile devices will have to function in both worlds simultaneously. So Rohde & Schwarz has developed the R&S CMX500, a radio communication tester for 5G NR that can be seamlessly integrated into an existing LTE test environment.
21st February 2019

5G FR1 and FR2 device test showcased at MWC2019

5G FR1 and FR2 device test showcased at MWC2019
5G devices operating in the mmWave range (FR2), such as smartphones and tablets, require over-the-air (OTA) testing since these devices usually have no RF port or interface to connect to, and conducted tests are therefore not possible. Rohde & Schwarz will introduce new products for RF parametric testing in both the FR1 and FR2 frequency ranges at Mobile World Congress in Barcelona (February 25-28).
20th February 2019

Test solution encompasses NB-IoT and Bluetooth

Test solution encompasses NB-IoT and Bluetooth
At MWC 2019 in Barcelona (February 25-28) Commsolid (a Goodix company) will present an IoT reference design integrating its NB-IoT and Bluetooth SOCs. The manufacturer uses the R&S CMW290 IoT radio communication testers for RF and functional testing of both transmission methods.
20th February 2019

Companies advance mmWave measurement technology for 5G

MediaTek and Rohde & Schwarz are collaborating to perform over-the-air (OTA) tests of MediaTek’s 5G frontend modules and antenna arrays. The R&S TS8980R&D-M1 test system, which includes the new R&S ATS1800C CATR (compact antenna test range) chamber, will be used to fully characterise, verify and test the antenna performance of MediaTek’s 5G network solutions including its Helio M70 5G modem.
19th February 2019

Duo combine for successful 5G sub 6GHz signalling tests

Duo combine for successful 5G sub 6GHz signalling tests
Successful validation of 5G NR cellular sub 6GHz signalling tests has been achieved by Rohde & Schwarz and Qualcomm Technologies. It brings the commercial roll-out of 5G NR one step closer. The end-to-end tests were done using the new R&S CMX500 radio communication tester, which will debut at Mobile World Congress 2019 in Barcelona (February 25-28).
19th February 2019

Duo collaborate to deliver C-V2X test solution

Duo collaborate to deliver C-V2X test solution
Rohde & Schwarz is collaborating with automotive E/E networking specialist Vector on a state-of-the-art cellular vehicle-to-everything (C-V2X) application layer test solution. The companies’ integrated test platform, which will be showcased for the first time at Mobile World Congress 2019 in Barcelona (February 25-28).
18th February 2019

IoT component testers head to MWC 2019 in Barcelona

IoT component testers head to MWC 2019 in Barcelona
As an infrastructure for smart cities and smart industries, the internet of things (IoT) is largely based on wireless components. Smooth component interaction, secure communications and long service life are essential success factors for this infrastructure.
18th February 2019

Mobile network benchmarking completes first phase

Commissioned by the South Africa-based mobile telecommunications company MTN Group, Rohde & Schwarz has completed the first phase of a comprehensive mobile network benchmarking campaign across 62 mobile network operators in 17 countries in Africa and the Middle East.
14th February 2019

WLAN 2x2 MIMO signalling tester to get MWC outing

WLAN 2x2 MIMO signalling tester to get MWC outing
Strengthening its position in WLAN signalling testing Rohde & Schwarz has unveiled the R&S CMW270 wireless connectivity tester which allows developers to test the RF characteristics of WLAN 2x2 MIMO stations in line with the IEEE 802.11ax standard.
13th February 2019

Rohde & Schwarz plays a strong hand at MWC 2019

Rohde & Schwarz plays a strong hand at MWC 2019
A variety of its latest wireless mobile testing solutions will be showcased by Rohde & Schwarz at Mobile World Congress in Barcelona (February 25-28). The company’s portfolio covers the entire mobile lifecycle from design, R&D, conformance testing and manufacturing to deployment and operation, including network and mobile endpoint security.
6th February 2019

5G testing in extreme temperatures to be demoed at MWC 2019

5G testing in extreme temperatures to be demoed at MWC 2019
At Mobile World Congress in Barcelona (February 25-28), Rohde & Schwarz will showcase a setup that enables 3D RF measurements of antenna characteristics in a temperature range from –20 °C to +85 °C. Integrating the R&S ATS-TEMP climate option into an R&S ATS1000 antenna test system makes it possible to combine testing in an RF OTA chamber and climatic chamber testing into a single procedure, saving engineers measurement time.
22nd January 2019

Touch-operated VNA offers enhanced RF performance

Touch-operated VNA offers enhanced RF performance
The R&S ZNA high-end vector network analyser, a powerful, universal test platform for characterising active and passive DUTs has been launched by Rohde & Schwarz. The two models R&S ZNA26 (10MHz to 26.5GHz) and R&S ZNA43 (10MHz to 43.5GHz) offer a dynamic range of 146dB (typ.) and a trace noise as low as 0.001dB at 1kHz IF bandwidth.  
14th January 2019


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IoT Tech Expo 2019
25th April 2019
United Kingdom Olympia, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona