Premo launches to the market a new 3D-coil isotropic magnetic antenna for NFC applications (13.56MHz). In the last few years, Communication technology by Near Field Communications (NFC) has experienced a lot of improvements. New tablets, smart phones, etc, has been announced with this NFC functionality for E-Wallet application.

Premo introduces a new series of Hall Effect sensors called the SY series. The new product has been designed for a double supply voltage of ±12 to ±18Vdc. SY family is a closed loop technology component in a very small package for THT mounting. Primary winding is already integrated, which allows to measure DC, AC and pulse currents on printed circuit boards.

PREMO launches a new family of its 1103 standard, universally adopted by industry. This format provides up to 55mV/Apk-pk/m sensitivity which gives it the best sensitivity by cm3 in the market. The new SDTR1103CAP, is a SMD antenna for low frequency 20kHz-150kHz receiver applications. This series offers upper and lateral side protection with co-polyamide polyhexamethylene polymer walls, gamma radiated with high thermal stability (supports up to 2...

PREMO launches a new family of its 1103 standard, universally adopted by industry. This format provides up to 55mV/Apk-pk/m sensitivity which gives it the best sensitivity by cm3 in the market. The new SDTR1103CAP, is a SMD antenna for low frequency 20kHz-150kHz receiver applications. This series offers upper and lateral side protection with co-polyamide polyhexamethylene polymer walls, gamma radiated with high thermal stability (supports up to 2...

PREMO launches a new family of its 1103 standard, universally adopted by industry. This format provides up to 55mV/Apk-pk/m sensitivity which gives it the best sensitivity by cm3 in the market. The new SDTR1103CAP, is a SMD antenna for low frequency 20kHz-150kHz receiver applications. This series offers upper and lateral side protection with co-polyamide polyhexamethylene polymer walls, gamma radiated with high thermal stability (supports up to 2...

Premo announced that its HCT-xxDS5, HCT-xxDSR5, HCT-xxPT5, HCT-xxPTR5, HCT-xxA05 and HCT-xxSY, devices received UL component certification. These devices are open type, current transducer that senses an alternating and a direct current in a feed-through wire set up at the through-hole, by a Hall Effect principle through the closed loop magnetic field in the core provided to, and the Hall Effect device generates a signal proportional to it.

IT systems are increasing every day, electronic devices that support them are more complex but also more reliable and they are able of working with adversities as failures in the power grid, either due to lack of supply or because quality of electric power is not good enough. Faced with these adversities, UPS is the best solution, providing stable power with high quality, although autonomy is limited.

The new distribution agreement is part of the growth process and international implementation that guides the Spanish inductive components manufacturer from the last 10 years. Present in France since 2008, with the opening of a R+D center in Grenoble, the group hopes to achieve through this partnership a leading position in the French market for passive components.

Premo has introduced a new series of Hall Effect sensors called DSR5 series. A new series designed for a single supply voltage of +5V.

Current elevation systems works with variable speed, acceleration and braking, in order to achieve the desired comfort level. This is achieving with the electrical motors of the installation controlled by the ac drives. These ac drives work in switching mode and generate numerous electromagnetic interferences. These electromagnetics interferences must be attenuated with an EMC filter to assure disturbances below the maximum allowed by the norm ap...

The continuous shortage on Hall Effect sensors in the market is generating big troubles on the industrial field and, of course, also in PV and eolic inverters manufacturers.

Premo Wuxi R&D Center has been approved and certified by Jiangsu Province. Total of 68 companies in the whole province has been certified before and PREMO Wuxi is the sole one representing Wuxi city, 95% were from Suzhou and rest from Nanjing.

PREMO launches a new EMC filter for PV installations, FEDC series, which allows EMC standards compliancy for entire PV system, prevent pre-mature panel aging and reduce installation volume.

In the last few years, Communication technology by Near Field Communications (NFC) has experienced a lot of improvements. New Iphone5 has been announced with this NFC functionality for E-Wallet application.

In the last few years, Communication technology by Near Field Communications (NFC) has experienced a lot of improvements. New Iphone5 has been announced with this NFC functionality for E-Wallet application.

The continuous shortage on Hall Effect sensors in the market is generating big troubles on the industrial field and, of course, also in PV and wind inverters manufacturers.

PREMO, technology leader for inductive, RFID components and EMC filters, has signed a Current Transducers supply agreement with Eaton Corporation, global leader in electrical control, power distribution, power quality, automation, and monitoring products and services. The contract has a development of up to 1 million annual Euros. PREMO provides components to Eaton Corporation, for Europe, Asia and USA, for 3 Million dollars.

PREMO has enlarged its broad range of transponders including its newest TOM1203LP series, a low profile, high performance, and robust transponder coil for automotive applications.

Inverters and DC/DC battery chargers for Electric and Hybrid Vehicles require minimum space (Premo’s New Automotive Current Sensor use just 2.4mm3), and maximum power handling per cubic cm (This sensor handles 14.6A/cm3). A proper switching management require digital controls more than conventional PWM and a real time high frequency ( The sensor is designed for 200kHz ) sampling of the currents flowing through the primary is a must for high...

Massive use of wireless devices in the 2.4 GHz band is producing what has been called the ISM Revolution. ISM mean: Industrial, Scientific and Medical. ISM bands are frequency bands of free use (portions of the radio-electric spectrum, for which no license is required). It doesn´t mean that the devices operating on ISM bands are exempt from the regulations governing the use of those bands, both from the standpoint of radio (power, channel, ...