Fairview Microwave

Address:

1130 Junction Dr., suite 100
Allen
TX 75013
United States of America

Phone: +1 (972) 649-6678

Web: http://www.fairviewmicrowave.com


Fairview Microwave articles

Displaying 1 - 20 of 36

Ultra-high frequency waveguide antennas up to 220GHz

Ultra-high frequency waveguide antennas up to 220GHz
Fairview Microwave has unveiled a new line of waveguide antennas designed to address wireless communication applications covering 40 to 220GHz bands including test and measurement, R&D, military/aerospace and experimental radar.
20th June 2019

New line of RF and microwave power amplifier accessories launched

New line of RF and microwave power amplifier accessories launched
Fairview Microwave has introduced a new family of RF and microwave power amplifier accessories that includes heat sinks, heat sinks with cooling fans and power control cable assemblies. The heat sinks in this line are suitable for thermal management of power amplifiers that generate excessive levels of heat. These heat sinks are able to enhance heat dissipation from a power amplifier to ensure the internal circuit assembly does not overheat and optimum performance and reliability is maintained.
26th March 2018

RF probes provide GSG and GS configuration up to 20 GHz

RF probes provide GSG and GS configuration up to 20 GHz
Fairview Microwave Inc. has introduced a new, exclusive line of coaxial RF probes and a probe positioner. These new products are ideal for use with chip evaluations, signal integrity measurements, coplanar waveguide, substrate characterisation, gigabit SERDES and test fixture applications. This new product line from Fairview is made-up of four, exclusive design, coaxial RF probes and one RF PCB probe positioner.
16th March 2018


Portable test cables facilitate RF analysis

Portable test cables facilitate RF analysis
  Supplier of on-demand microwave and RF components, Fairview Microwave, has introduced a new series of rugged, portable, phase stable RF analyser cables. Typical applications include handheld network analysers, base station analysers, portable spectrum analysers, field testing, tower measurements, distance-to-fault measurements and site maintenance.
24th October 2017

Waveguide sections offered in sizes from WR-10 to WR-137

Waveguide sections offered in sizes from WR-10 to WR-137
  Supplier of on-demand microwave and RF components, Fairview Microwave, has launched a line of straight waveguide sections that operate in the frequency range of 5.85 to 110GHz and in 13 waveguide bands from C to W band.
9th August 2017

BMA connectors provide low VSWR

BMA connectors provide low VSWR
  Supplier of microwave and RF components, Fairview Microwave, has launched a product line of 45 BMA connectors with Voltage Standing Wave Ratio (VSWR) as low as 1.2:1, and seven BMA adapters with VSWR as low as 1.15:1. 
23rd June 2017

Connectors and adapters provide maximum operating frequency

Connectors and adapters provide maximum operating frequency
  Fairview Microwave has released 18 new 4.3-10 connectors and adapters with low-PIM performance of -166 dBc typical and a maximum operating frequency of 6GHz. Typical applications include wireless base stations, small cells, custom cable assemblies, antenna feeder cables, mobile communications systems and Distributed Antenna Systems (DAS).
7th June 2017

Flexible VNA test cables operate up to 110GHz

Flexible VNA test cables operate up to 110GHz
Supplier of on-demand microwave and RF components, Fairview Microwave, has introduced a new line of 1.0mm flexible cables operating up to 110GHz. These cables are designed to provide precision results for Vector Network Analyser (VNA) testing, automotive radar testing, semiconductor probe testing and military radar testing. These VNA cables are suitable for use in radar, test bench, millimeter wave radio and microwave radio applications.
23rd May 2017

Analogue phase shifters use TTL logic interface for precise control

Analogue phase shifters use TTL logic interface for precise control
A supplier of on-demand microwave and RF components, Fairview Microwave, has introduced a series of 8-bit programmable phase shifters that are adjustable over a full 360° range. These three new models can produce a discrete set of phase states of up to 256 total steps in 1.4° increments with superior accuracy and minimal phase shift error.
29th March 2017

Waveguide Gunn oscillator can be tuned up to +/-1.0GHz

Waveguide Gunn oscillator can be tuned up to +/-1.0GHz
A waveguide Gunn oscillator from Fairview Microwave offers a cost-effective source for microwave power with excellent frequency and power stability while generating low-phase-noise. Typical applications include transmit and receive oscillators for radio communications, local oscillator source that can be multiplied for higher mm-wave frequency test and measurement, military and commercial radar sources, police radar, Doppler sensors and security screening.
22nd February 2017

Right-angle waveguide to coax adapters operate up to 65GHz

A supplier of on-demand microwave and RF components, Fairview Microwave, has released a line of 1.85, 2.4 and 2.92mm waveguide to coax adapters with operating ranges up to 65GHz. These waveguide adapters are ideal for numerous applications requiring a transition from coax to waveguide or vice versa, including SATCOM, wireless communications, industrial, test and measurement and defense systems. 
16th November 2016

Waveguide bends support frequencies up to 90GHz

Waveguide bends support frequencies up to 90GHz
A line of waveguide bends operating from 5.85-90GHz across 12 frequency bands (from C band to W band) has been launched by Fairview Microwave. These waveguide bends are frequently used in applications such as high efficiency RF, test benches, instrumentation, microwave and mm-wave transmissions, MILCOM, SATCOM, radar and telecom.
14th November 2016

Waveguide twists operate across seven frequency bands

Waveguide twists operate across seven frequency bands
A family of precision waveguide twists operating across seven frequency bands from 18-110GHz has been unveiled by Fairview Microwave. These twists are specifically designed to prevent unwanted distortion in the signal’s transmission and are useful for systems requiring a turn in the polarisation and waveform.
4th November 2016

Zero bias detectors display flat frequency response

Zero bias detectors display flat frequency response
Supplier of on-demand microwave and RF components, Fairview Microwave, has expanded their portfolio of zero bias Schottky detectors that display extremely flat frequency response over broad RF and microwave frequencies from 10MHz-26.5GHz.
25th October 2016

Solid state GaN power amplifiers save design time

Solid state GaN power amplifiers save design time
  Fairview Microwave has announced a line of solid state GaN power amplifiers offering designers a unique solution of off-the-shelf components, typically requiring months of lead time to acquire.
13th July 2016

Semi-rigid test probes operate up to 6GHz

Semi-rigid test probes operate up to 6GHz
Fairview Microwave debuts a new family of semi-rigid test probes operating up to 6GHz. Designed to assist in testing microwave circuits, these test probes are constructed of high quality semi-rigid coax and SMA Female connectors. The new test probe assemblies from Fairview Microwave come in multiple cable diameters to help when attaching the unterminated end of the probe to a circuit board trace.
19th February 2016

Electromechanical switches come in compact surface mount packages

Fairview Microwave announces a line of high-reliability SPDT surface mount electromechanical RF switches that cover broadband frequencies from DC to 8GHz. These RF switches offer exceptional reliability and repeatable performance which make them a suitable solution for demanding industries and applications related to aerospace, defense, industrial, telecom, instrumentation, medical devices and many others.
20th January 2016

Zero-biased waveguide detectors operate from Ka- to W-band

Zero-biased waveguide detectors operate from Ka- to W-band
Delivering zero-biased performance in Ka, Q, U, V, E and W frequency bands, Fairview Microwave has introduced a family of waveguide detectors. These waveguide detectors are commonly used in aerospace, defence and commercial wireless applications used in instrumentation, power detection, power monitoring, direct detection receivers, high frequency communications, radar, SATCOM, point-to-point radio, telecomms, data links and R&D.
23rd October 2015

Combine RF input signals into a common output

Combine RF input signals into a common output
Fairview Microwave introduces a line of broadband RF power combiners. These combiners are commonly deployed in systems using components such as power amplifiers, antenna feeds, attenuators and switches, often for combining individual power amplifiers together into a large power block in an amplifier system.
16th October 2015

Miniature cable assemblies up to 6GHz

Miniature cable assemblies up to 6GHz
Fairview Microwave introduces a recent family of ultra-miniature UMCX, WMCX and HMCX32 cable assemblies. Commonly used to connect an external antenna to a mini-PCB, these flexible micro-coax jumpers offer operation from DC to 6GHz, which are suitable for use in wireless communications systems. Additional wireless applications include antennas for GPS and other radio systems, WiFi, WLAN, Bluetooth, ZigBee, LTE, mini-PCI and PDA/PCS/cellular handset applications.
8th October 2015


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
Connected World Summit 2019
22nd October 2019
United Kingdom The Business Design Centre, London
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona