PLL synthesiser improves wireless service quality

25th January 2016
Posted By : Nat Bowers
PLL synthesiser improves wireless service quality

Integrating a VCO, ADI has introduced a PLL synthesiser that allows mobile network operators to improve cellular base station performance and the quality of wireless service. The ADF4355 PLL with VCO synthesiser operates up to 6.8GHz, a frequency band that affords a significant margin to the industry’s current carrier frequencies.

When designed into cellular base stations, the PLL synthesiser’s higher frequency and lower VCO phase noise enables wireless service providers to increase call throughput and cell phone coverage and service more users per base station at no significant additional cost. The device’s higher frequency band offers similar throughput advances for makers of point-to-point/point-to-multipoint microwave links, satellite/VSAT systems, industrial and test and measurement systems as well as other wireless equipment.

In frequency generation applications for wireless and industrial applications, where VCO phase-noise performance plays a pivotal role in determining the overall system performance of the RF signal transmission and receive, the choice of PLL synthesiser for the RF local oscillator is a key system design consideration. ADI’s ADF4355 wideband PLLVCO synthesizer meets the exacting VCO phase noise requirements for frequency generation applications while delivering a cost-competitive alternative to other PLL devices in a smallest-in-class 32-lead 5x5mm LFCSP. This combination of features allows designers to reduce risk by ensuring the lowest possible phase noise, extending frequency coverage, shrinking footprint and increasing operating range across temperature.

The ADF4355 PLL synthesiser’s integrated VCO has an output frequency ranging from 3.4 to 6.8GHz. The VCO frequency is connected to divide by 1, 2, 4, 8, 16, 32 or 64 circuits, which allows the designer to generate RF output frequencies as low as 54MHz, thereby allowing the ADF4355 to cover a continuous range from 54 to 6,800MHz with no gaps. For applications that require noise isolation, the RF output stage features a mute function that is both pin and software controllable. The ADF4355 can operate in either fractional-N or integer-N mode and, with 38-bit modulus resolution, offers exact mode frequency operation, independent of reference input frequency.

Control of all on-chip registers is through a simple 3-wire interface. The ADF4355 operates with analogue and digital power supplies ranging from 3.15 to 3.45V, with charge pump and VCO supplies from 4.75 to 5.25V. The ADF4355 also contains hardware and software power-down modes.

Available now for sampling and in production volumes, the ADF4355 PLL synthesiser is priced at $20.44 each in 1,000 unit quantities.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IoT Tech Expo 2019
25th April 2019
United Kingdom Olympia, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona