I/O and serial data via a wireless interface

27th September 2018
Posted By : Alex Lynn
I/O and serial data via a wireless interface

The proprietary Radioline wireless system from Phoenix Contact is now able to transmit I/O signals and serial modbus/RTU data in parallel. Devices with firmware 1.80 or higher support dual mode PLC/modbus RTU, while any older devices can be updated via the PSI-CONF 2.50 software free of charge.

I/O modules from the product range can then be added to a Radioline device and additional modbus/RTU slaves can be connected via the serial interface.

This dual mode now makes it possible to transfer information from a serial measuring station and additional I/O data simultaneously. This data can, for example, include door contacts or alarm signals from passive sensors. While in the past, a parallel communication path or additional modbus/RTU station was required for this purpose, the I/O function of the Radioline system can now be accessed.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IoT Tech Expo 2019
25th April 2019
United Kingdom Olympia, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona