WLAN 2x2 MIMO signalling tester to get MWC outing

Posted By : Mick Elliott
WLAN 2x2 MIMO signalling tester to get MWC outing

Strengthening its position in WLAN signalling testing Rohde & Schwarz has unveiled the R&S CMW270 wireless connectivity tester which allows developers to test the RF characteristics of WLAN 2x2 MIMO stations in line with the IEEE 802.11ax standard.

Multiple input multiple output (MIMO) is a multi-antenna method that uses multipath propagation to boost data rates in wireless communications. The transmit and receive antennas must be spatially separated from each other. The compact design of mobile devices such as smartphones is a limiting factor.

These devices can hold at most two transmit and two receive antennas, which limits transmission to 2x2 MIMO.

This solution also allows users to determine the data throughput in the transmit and receive directions.

In signalling mode, the CMW270 emulates a WLAN 11ax access point (AP) to which the DUT, a WLAN station, is connected in normal mode.

Unlike commonly used non-signalling mode, tests and measurements in signalling mode have the advantage that the user performs them under realistic conditions and does not need wired remote control with device-specific control software for the DUT.

The CMW270 is ideal for more than just signalling tests in line with the IEEE 802.11a/b/g/n/ac/ax WLAN standards.

It can also comprehensively and simultaneously test Bluetooth devices, for example. The R&S CMW270 also supports RF tests for ZigBee and Thread components in line with IEEE 802.15.4.



You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Connected World Summit 2019
22nd October 2019
United Kingdom The Business Design Centre, London
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona