Test & Measurement

Displaying 11 - 20 of 599

400GbE PAM4 BER measurements in one package

400GbE PAM4 BER measurements in one package
A 64-Gbaud PAM4 Pulse Pattern Generator (PPG) and 32-Gbaud PAM4 Error Detector (ED) has been announced by Anritsu. This PAM4 BERT supports 400GbE testing when these modules are installed in the Anritsu Signal Quality Analyser-R MP1900A series to implement a bit-error-rate test solution with best-in-class signal level quality and excellent Rx sensitivity for next-generation broadband communication systems.
21st November 2018

Signal generator supports NGO waveform

Signal generator supports NGO waveform
The Sirius/XM signal generator from IZT has a new overlay waveform. The overlay modulation which was used for the Sirius Waveform was exchanged and enhanced with the next generation overlay (NGO). IZT Signal Generators support the new broadcasting technology and are suitable as test equipment for upcoming broadcasting systems.
20th November 2018

electronica: Chip-set takes oscilloscope to new level

electronica: Chip-set takes oscilloscope to new level
A test and measurement highlight at electronica was RIGOL Technologies’ addition to its UltraVision II family of oscilloscopes. The MSO5000 Series digital oscilloscope delivers transformational price/performance capability in a bench oscilloscope, says RIGOL. At the heart of the UltraVision II architecture is the Phoenix chip-set.
18th November 2018


Trigger function enhances 5G test platform

 Trigger function enhances 5G test platform
Test setups for new technologies such as 5G and state-of-the-art radar technology require switch and control technology with large frequency ranges and short switching times. To meet this requirement, Rohde & Schwarz has completely revised its platform and now presents the new R&S OSP220/230/320 units and the new R&S OSP-B200S2 satellite box.
15th November 2018

Test solution measures radiation on 5G devices

Test solution measures radiation on 5G devices
A test system for conducting radiation measurements on 5G millimeterwave devices in the range from 20GHz to 87GHz using a compact antenna test range (CATR) has been demonstrated by Rohde & Schwarz. The new solution will offer 5G RF engineers a great advantage, significantly accelerating time-to-market for 5G millimeterwave cellular devices.
13th November 2018

Trio deliver Over-the-Air test for 5G base stations

Successful validation of an Over-the-Air (OTA) test method for evaluating the radio frequency (RF) performance of 5G base stations has been announced by Keysight Technologies in collaboration with the China Academy of Information and Communications Technology (CAICT) and Tsinghua University.
8th November 2018

Anritsu, Bluetest collaborate on 5G testing

Anritsu, Bluetest collaborate on 5G testing
Following their successful long-term collaboration in LTE OTA measurement solutions, Anritsu and Bluetest AB are extending the relationship to 5G testing. This includes the integration of Anritsu’s Radio Communication Test Station MT8000A and Bluetest’s OTA Reverberation Test System RTS65.
31st October 2018

Calibration standards added to vector network analysers

Calibration standards added to vector network analysers
Pico Technology has introduced two new products to its RF portfolio. The TA430 (Insertable M-F) and TA431 (Non-insertable F-F) VNA check standards can optionally be used to validate the accuracy of a network analysis test setup and its calibration before, during or after a sequence of measurements is made.
25th October 2018

Mixed-signal scope adds precision and productivity

Mixed-signal scope adds precision and productivity
The DLM3000 Mixed Signal Oscilloscope Series from Yokogawa features the “look and feel” and small footprint of the earlier DLM2000 Series but with a complete hardware redesign which brings higher measurement speed and precision plus an intuitive touchscreen display for enhanced ease of use and improved productivity.
24th October 2018

Clock reference design for RADAR and 5G wireless testers

Clock reference design for RADAR and 5G wireless testers
  High speed multi-channel applications require low noise and scalable clocking solutions capable of precise channel-to-channel skew adjustment to achieve optimal system SNR, SFDR, and ENOB.
24th October 2018


Test & Measurement documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Wearable Tech Show 2019
12th March 2019
United Kingdom London
The Security Event 2019
9th April 2019
United Kingdom NEC, Birmingham