“The ADF41020 PLL is the latest addition to ADI’s leading portfolio of phase locked loop synthesisers and extends our portfolio into higher frequency ranges,” said Peter Real, vice president, Linear and RF products, Analog Devices. “This new PLL helps significantly reduce component count and system cost while continuously improving performance in next-generation radio designs.”
The ADF41020 PLL frequency synthesiser consists of a low-noise, digital phase-frequency detector, a precision charge pump, a programmable reference divider and high-frequency programmable feedback dividers. A complete synthesiser can be implemented if the PLL is used with an external loop filter and VCO (voltage controlled oscillator). The PLL can be used to drive external microwave VCOs via an active loop filter. The pin-out matches very closely the pinout of the ADF4106/7/8 family of integer-N PLLs, meaning only a minor layout change is required when updating a design to take advantage of the much wider bandwidth.
ADF41020 PLL Frequency Synthesiser Key Features
• 18-GHz maximum RF input frequency
• Integrated prescaler
• Programmable dual-modulus prescaler
• 2.7-V to 3.3-V PLL power supply
• Programmable charge-pump currents
• 3-wire serial interface
• Analog and digital lock detect
• Hardware and software power-down mode
The ADF41020 PLL frequency synthesiser is software compatible with the existing ADF4106, ADF4107 and ADF4108 PLLs and is well-suited for use with a variety of products including the ADP150 LDO (low dropout regulator) and the OP184 operational amplifier.
RF IC Portfolio Covers Entire RF Signal Chain
Using a unique combination of design skills, system understanding and process technologies, Analog Devices offers the broadest portfolio of RF ICs covering the entire RF signal chain from industry-leading high-performance RF function blocks to highly integrated WiMAX and short-range, single-chip transceiver solutions. The RF function blocks include PLL, integrated PLL/VCO and DDS synthesizers; TruPwr™ RMS power detectors and logarithmic amplifiers; variable gain amplifiers; power amplifiers, low noise amplifiers and other amplifiers; RF mixers and direct conversion modulator and demodulator products. These products are supported by a wide range of design resources to ease the development of RF systems, including free design tools, Circuits from the Lab™ reference circuits and the EngineerZone™ technical forums.