Rutronik Elektronische Bauelemente GmbH

Address:
Industriestrasse 2

75228 Ispringen
Germany

Phone: +49 (0) 7231 / 801-0

Fax: +49 (0) 7231-82282

Web: http://www.rutronik.com/


Rutronik Elektronische Bauelemente GmbH articles

Displaying 1 - 20 of 37

Wireless SoCs enable design flexibility for IoT

Wireless SoCs enable design flexibility for IoT
Ultra-low power multi-protocol wireless SoCs and modules of Redpine Signals’ RS9116 family are available from Rutronik UK in hosted (nLink) or embedded (WiSeConnect) software architecture with multiple host interfaces (SDIO, USB, SPI, UART). As a result, they provide great design flexibility for battery operated IoT devices.
28th August 2019

Why do devices with position tracking require an internet connection?

Why do devices with position tracking require an internet connection?
In a few months the European satellite system Galileo will be completed. Most devices with location tracking functions already support it. Even so, their manufacturers should endeavour to implement over-the-air access, as this is the only way that satellite selection can be adjusted on demand as needed – something which can be a critical factor.  By Bernd Hantsche, Director Product Marketing Embedded & Wireless at Rutronik Elektronische Bauelemente
27th August 2019

Wireless MCUs are based on secure-zone architecture

Wireless MCUs are based on secure-zone architecture
Wireless Secure MCUs featuring a comprehensive multi-protocol wireless sub-system are available at Rutronik UK. Redpine Signals’ RS14100 WiSeMCU family of SoCs and modules feature voice activity detection (VAD) and up to eight inputs for capacitive touch sensors.
14th August 2019


Development kit supports both LTE standards

Development kit supports both LTE standards
The nRF9160 Development Kit from Nordic Semiconductor is a cost-effective hardware development platform providing all necessary tools for evaluation and development of application firmware based on the nRF9160 SiP (System-in-Package).
30th July 2019

Wireless MCU solution runs Zigbee or Thread

Wireless MCU solution runs Zigbee or Thread
The RS13100 Wireless MCU from Redpine Signals is an ultra-low power dual-mode SoC with Bluetooth 5 and 802.15.4 capable of running ZigBee or Thread now available from Rutronik UK.
4th June 2019

Multiprotocol system-on-chip supports Bluetooth 5.1

Multiprotocol system-on-chip supports Bluetooth 5.1
The nRF52811 from Nordic Semiconductor is a multiprotocol SoC (System-on-Chip) and one of the first devices that supports the new Bluetooth Core Specification 5.1. It is available at Rutronik UK.
31st May 2019

SiP opens up options for LTE developers

SiP opens up options for LTE developers
The nRF9160 SiP from Nordic Semiconductor is making the latest LTE technology accessible for a wide range of applications and developers. It is available from Rutronik UK. Through the high integration and pre-certification for global operation, it solves complex wireless design challenges and enables developers to make easy use of this cellular technology.
18th December 2018

Low-cost USB dongle aids wireless designs

Low-cost USB dongle aids wireless designs
The nRF52840 dongle has been designed by Nordic Semiconductor as a front-end, physical gateway for the nRF Connect for Desktop PC tool. It allows developers to immediately connect a PC to a wireless device. This further simplifies application design and product development process.
4th December 2018

Flexible and High-Performance LTE Antenna

Flexible and High-Performance LTE Antenna
The 1002289 antenna from Ethertronics offers the ability to cover many wireless technologies with only one antenna. With its broadband tuning it is just suitable for many international LTE bands as well as for sub-GHz technologies such as LoRa or Sigfox. Based on a flexible substrate, it can be easily integrated into systems.
24th October 2018

Independent overview helps tighten Bluetooth security

Independent overview helps tighten Bluetooth security
The Bluetooth Special Interest Group (SIG) published instructions for eliminating security vulnerabilities in the “Secure Simple Pairing” and “LE Secure Connections” processes. Rutronik UK now offers a manufacturer-independent overview which shows the patch status of the individual chip and module manufacturers.
24th October 2018

Energy-efficient power supplies target IoT

Energy-efficient power supplies target IoT
15W and 20W AC/DC power supplies from RECOM are designed for low power IoT and household applications. Based on the footprint of the compact RAC10-K modules, these new modules feature high-efficiency over a wide load range and minimal standby power consumption. They are available from Rutronik UK.
5th October 2018

Low-cost USB dongle for wireless designs

Low-cost USB dongle for wireless designs
Nordic Semiconductor has designed the nRF52840 dongle (Distribution: Rutronik) as a suitable front-end, physical gateway for the „nRF Connect for Desktop“ PC tool. It allows developers to immediately connect a PC to a wireless device. This further simplifies application design and product development process.
6th September 2018

AC/DC power supplies deliver 15W or 20W of power

AC/DC power supplies deliver 15W or 20W of power
15W and 20W AC/DC power supplies from RECOM are designed for low power IoT and household applications. Based on the footprint of the compact RAC10-K modules, these new modules feature high-efficiency over a wide load range and minimal standby power consumption. They are available now at www.Rutronik24.com. 
16th August 2018

Audit keeps pace with Bluetooth attack vectors

In mid-July, the Bluetooth Special Interest Group (BSIG) published instructions for eliminating security vulnerabilities in the “Secure Simple Pairing” and “LE Secure Connections” processes. Rutronik now offers a manufacturer-independent overview at https://rutronik-tec.com/bluetoothsecurity-vulnerability-status/, which shows the patch status of the individual chip and module manufacturers.
10th August 2018

MCUs offer tight security and connectivity for IoT

MCUs offer tight security and connectivity for IoT
The Renesas S3A1 microcontroller group, now available from Rutronik UK, is ideally suited for all applications that require a high level of security and IoT device-to-cloud connectivity. The MCUs have been released alongside the v.1.4.0 version update for the Synergy Software Package (SSP).
25th July 2018

Hardware based security solution available

Hardware based security solution available
It has been announced that the OPTIGA Trust X is a turnkey security solution which provides robust security to the diverse applications in the Internet of Things, ranging from industrial automation systems and smart homes to consumer devices. 
19th July 2018

Rutronik to display security solutions at the IoT Tech Expo

Rutronik to display security solutions at the IoT Tech Expo
At the IoT Tech Expo Amsterdam on 27th-28th June, Rutronik will be exhibiting. In connection with the eponymous trade show theme, the Internet of Things (IoT), the distributor will be providing information on key products from the SMART and EMBEDDED product campaigns and on security solutions in accordance with Europe’s General Data Protection Regulation (GDPR).
22nd June 2018

Rutronik joins Insight-SiP at the 2018 IoT World Conference

  Rutronik Inc. will be attending and co-exhibiting at the 2018 IoT World Conference, scheduled for 14th to 17th May at the Santa Clara Convention Center in Santa Clara, California.
15th May 2018

Kit simplifies IoT connection to enterprise cloud

The AE-CLOUD1 kit from Renesas is now available at Rutronik UK. It demonstrates the Synergy Enterprise Cloud Toolbox which enables users to connect their IoT applications to enterprise cloud vendors such as Amazon, Microsoft or Google with minimum effort and no cumbersome licensing.
4th May 2018

Rutronik joined Embedded Systems Conference for the first time

Rutronik joined Embedded Systems Conference for the first time
  Rutronik participated for the first time at the 2018 Embedded Systems Conference, which took place from the 18th-19th April at the Boston Convention Center in Boston, MA.
1st May 2018


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona