Pulse Electronics Corporation

Address:
Pulse Worldwide Headquarters
12220 World Trade Drive
San Diego

CA92128
United States of America

Phone: 858 674 8100

Fax: 858 674 8262

Web: www.pulseelectronics.com


Pulse Electronics Corporation articles

Displaying 1 - 20 of 20

Performance-enhancing installation options for antennas

Performance-enhancing installation options for antennas
Pulse Electronics Corporation introduces two performance-enhancing installation options for its PIMinator line of Distributed Antenna System (DAS) in-building ceiling-mount antennas. The DASACHOLDER is a sturdy, plastic, above-ceiling antenna holder that is easy to install, is hidden above the ceiling so it doesn't interfere with the aesthetics of the building, and does not induce passive intermodulation (PIM) in in-building installations.
12th May 2016

Ceiling-mount, omni-directional antennas available in white

Ceiling-mount, omni-directional antennas available in white
Expanding its Clarity family of DAS, ultra-thin, ceiling-mount, omni-directional antennas, Pulse Electronics has introduced the Clarity White Antenna. The white antenna offers a lower cost, yet high performance antenna that fits the aesthetic requirements of many buildings and public places. It can be installed with Pulse's solid-ceiling adapter which makes antenna installation amazingly simple, even in hard-pan ceilings without easy access.
19th April 2016

Translucent antennas to be showcased

Pulse Electronics Corporation's line of translucent antennas will be showcased at Booth 2440 at the DistribuTECH Conference and Exposition, being held at the Orange County Convention Center, Orlando, FL, February 9-11th, 2016. Pulse's Distributed Antenna System (DAS) ultra-thin, clear, ceiling mount antennas have been selected to enable wireless network coverage in building 7 of the World Trade Center, New York, NY.
8th February 2016


Satellite navigation system antenna provides wireless signal reception

Satellite navigation system antenna provides wireless signal reception
Pulse Electronics Corporation's Monarch series multi-mode global navigation satellite system ceramic antennas provide wireless signal reception for the four major global and regional satellite systems: GPS, GLONASS, Beidou (Compass) and Galileo. The Monarch series W3010 is a compact, low profile antenna that delivers high efficiency (75% typical) over a wide bandwidth for enhanced navigation and device tracking.
21st January 2016

Proximity sensor & antenna combine to optimise functions

Proximity sensor & antenna combine to optimise functions
Pulse Electronics introduces an all-in-one combination antenna and proximity sensor package to optimise the characteristics of both functions, thus enabling better device performance and increased design flexibility for tablets, laptops and notebook computers.
16th December 2015

Ultra-thin antennas operate from 380-520Mhz & 698-960Mhz

Ultra-thin antennas operate from 380-520Mhz & 698-960Mhz
Pulse Electronics Corporation introduces a recent edition in the Clarity family of antennas that operates at UHF band frequencies including 380-520MHz and 698-960MHz to improve public safety radio coverage. The Clarity-Pearl antennas deliver an architecturally pleasing solution to requirements set by the International Fire Code and National Fire Protection Association (IFC/NFPA) codes for public safety in-building communication.
11th December 2015

Antenna miniaturisation enables high data rates in tight spaces

Antenna miniaturisation enables high data rates in tight spaces
Pulse Electronics has announced a new method of constructing antennas to enable high data rates in tight spaces that require 3x3 MIMO configurations such as tablets, laptops, and notebook computers. The DenseAnt TL 1.0 advanced manufacturing antenna technology fits three WLAN antennas in physically the same volume as was used for two LDS antennas without compromising performance or isolation.
8th December 2015

Antenna to provide data transmission for IoT applications

Antenna to provide data transmission for IoT applications
Pulse Electronics Corporation introduces an internal dual-band flexible printed circuit (FPC) antenna to provide connectivity and data transmission for IoT applications in security, home automation, appliances, lighting, medical/telemedicine, sensors, network monitoring, data collection, wearables, automotive, in-vehicle communication and vending.
8th December 2015

Improve vehicle data throughput & GPS navigation

Improve vehicle data throughput & GPS navigation
Featuring superior port-to-port isolation for excellent signal clarity, Pulse Electronics has announced a combination GPS/multiband vehicle-mount antenna. The GPSMB501 consists of five connectors to access five antennae solutions (two MIMO cellular, two dual-band MIMO WLAN and one for GNSS). An optional magnetic mount base makes this antenna easy to install and remove without drilling a hole in the vehicle.
12th November 2015

Antennas enable wireless comms in the World Trade Center

Antennas enable wireless comms in the World Trade Center
Pulse Electronics announces that its Clarity family of antennas has been selected by a major US wireless carrier to enable wireless network coverage in a key building of the World Trade Center complex in New York, NY. Over 700 of Pulse's Clarity DASUTCCR500NF Distributed Antenna System (DAS) ultra-thin, clear, ceiling-mount antennas will be deployed in the building.
21st October 2015

Small multi-band antennas enhance IoT communications

Small multi-band antennas enhance IoT communications
Combining GPS and WiFi for high efficiency in a compact package, Pulse Electronics has announced two embedded ceramic multi-band chip antennas. Their small size, low cost, high efficiencies and multi-band capabilities enable a seamless antenna solution for many IoT applications in the medical, transportation, point-of-sale, vending, utility, security and tracking industries, as well as for smart homes/cities.
6th August 2015

G.fast transformers can be used with Broadcom's chipsets

G.fast transformers can be used with Broadcom's chipsets
  Pulse Electronics has introduced its new family of G.fast functional isolation transformers. The BX4500LNL and BX4500LNLT transformers can be matched with a Microsemi line driver and used with Broadcom's BCM652xx DSP and BCM659xx AFE chipsets for G.fast transmission, Le87282. 
26th June 2015

Ultra-thin ceiling antennas appear almost invisible

Ultra-thin ceiling antennas appear almost invisible
Expanding its ultra-thin, clear, DAS ceiling antennas, Pulse Electronics' DASUTCC family has a see-through housing which makes them nearly invisible when mounted. Extending just 8.4mm (0.33") below the ceiling, the antennas have an industry-leading PIM rating of better than -155dBc at 2x20W (2x43dBm).
10th June 2015

MIMO DAS antennas enable high multi-port performance

MIMO DAS antennas enable high multi-port performance
Expanding its PIMinator line of low PIM antennas, Pulse Electronics introduces its DAS in-building ceiling mount MIMO antennas. The DASLTE500NFMIMO antennas have high port-to-port isolation and superior gain patterns for both ports 1 and 2, providing wireless carriers with improved data throughput and implementation flexibility.
21st November 2014

Inductors have low DC resistance and high Q values

Inductors have low DC resistance and high Q values
A line of multilayer RF ceramic inductors with low DC resistance, high Q values, self-resonant frequency, and reliability, has been introduced by Pulse Electronics. The line includes the 0201CC series whch are 1.0-100nH, with a low DCR and high Q, the 0402CC series which are 1.0-270nH, with a low DCR and high Q and the 0402CH series which are 1.0-15nH, with a very high Q.
16th July 2014

Power splitters for indoor DAS antennas

Power splitters for indoor DAS antennas
Suitable for use with the company's PIMinator low passive intermodulation (PIM) indoor distributed antenna system (iDAS) family, Pulse Electronics introduces a new line of power splitters. The power splitters are designed to work with Pulse's PIMinator line of antennas in order to ensure a PIM spec of -155dBc at 2x20W.
25th March 2014

Transformers fulfill continuing demand for higher bandwidth

Transformers fulfill continuing demand for higher bandwidth
Compliant for use with the Lantiq Vinax V3 chipset family, the BX4289LNL and BX4289LNLT signals the expansion of Pulse Electronic's series of transformers. The Class H line driver VDSL2 30MHz vectored transformer is used with the BX4289LNL and BX4289LNLT to deliver high bandwidth over existing copper transmission lines.
21st January 2014

Omni antennas boast PIM spec of -155 dBc at 2x20W

Omni antennas boast PIM spec of -155 dBc at 2x20W
Claiming an industry-leading PIM spec of -155 dBc at 2x20W, the 3 low PIM DAS omni antennas are the latest products announced by Pulse Electronics. The low PIM DAS in-building, ceiling mount omni antennas fulfill the demanding requirements of cellular operators and integrators of low PIM components for 2G, 3G, and LTE/4G bands around the world.
14th January 2014

Pulse's ultra-thin NFC antenna for mobile devices

Pulse's ultra-thin NFC antenna for mobile devices
Pulse Electronics introduces an ultra-thin near field communications ferrite sheet antenna. The antenna is 28% thinner than the previous version and still meets the EMVCo specification of 40mm. It enables NFC connectivity to mobile devices for payment sharing, credential storage and exchange, accessing and controlling data, and wirelessly connecting to tags.
9th October 2013

Enhanced LDS antennas with integrated SMT components

Enhanced LDS antennas with integrated SMT components
Pulse Electronics announces in-house capability to integrate passive surface mount technology components on 3D laser direct structuring antennas. Incorporating SMT components with the 3D LDS antenna structure saves space on the mobile device's printed circuit board and optimizes the use of available space on the antenna.
30th September 2013


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona