Wireless

Displaying 111 - 1631 of 1521

AMC suits 4G, LTE & LTE Advanced applications

AMC suits 4G, LTE & LTE Advanced applications
Designed for wireless processing applications including 4G, LTE, LTE Advanced and beyond, the AMC-V7-2C6670 is a high performance Advanced Mezzanine Card (AMC) from CommAgility. The module has the processing power of a Xilinx Virtex-7 FPGA and two TI TMS320C6670 multicore Digital Signal Processors (DSPs).
20th January 2014

WiFi 11n module is designed for the IoT market

WiFi 11n module is designed for the IoT market
Complementing the company's SN820x product family, Murata have announced the introduction of the SN8000 WiFi 11n module. Offering increased flexibility, the WiFi module enables Broadcom’s WICED WiFi solution to be run on customer-selected STMicroelectronics' STM32 based ARM Cortex M3 and M4 microcontrollers rather than a preselected platform.
15th January 2014

4G devices support LTE category 4 and feature 3G/2G fallback

4G devices support LTE category 4 and feature 3G/2G fallback
A line of LTE modules with UMTS/HSPA+, GSM/EDGE and GPRS fallback has been announced by u-blox. Designated the TOBY-L2 and MPCI-L2 modem series, the devices support LTE category 4 speeds up to 150 Mb/s down and 50 Mb/s up.  
15th January 2014


ODU satellite chipset expands reach for operators

An Outdoor Unit (ODU) satellite chipset that enables operators to deliver a wider range of services to more subscribers has been announced by Broadcom. Delivery of a wider range of services is achieved without additional satellite dish installations. Broadcom's BCM4551 offers a higher level of integration, while consuming less power than the previous generation chipset, and enables direct sampling of low-noise block outputs across worldwide ODU satellite markets. 
8th January 2014

5W chipset enables fast wireless charging

5W chipset enables fast wireless charging
Enabling faster wireless charging of mobile devices, the enhanced TB6865FG power transmitter and TC7763WBG receiver chipset from Toshiba Electronics Europe as been made available. Supporting 5W power transfer and compatible with the QI standard 1.1, the chipset also features a rigorous Foreign Object Detection function and an integrated digital logic controller that reduces component count and minimizes design complexity.    
7th January 2014

Wireless power transmitter supports a 5V input

Wireless power transmitter supports a 5V input
Claiming to be the industry’s first Qi-compliant single-chip wireless power transmitter supporting a 5V input, the IDTP9038 from Integrated Device Technology is designed for use in wireless charging systems. The transmitter enables the development of USB-powered wireless charging bases with 75% fewer IC's than competing solutions.
7th January 2014

5G WiFi SoCs enable HD-quality streaming

5G WiFi SoCs enable HD-quality streaming
Enabling streaming of HD-quality content, online gaming and other high-bandwidth applications, Broadcom introduce the BCM43569 and BCM43602 5G WiFi SoCs for connected home devices. Broadcom claim that the BM43569 is the industry's first dual-band 2x2 MIMO combo chip with a USB 3.0 interface and advanced coexistence technology that enables superior performance by allowing smart TVs to receive both Wi-Fi and Bluetooth signals simultaneously.
7th January 2014

Combining TransferJet, NFC and Qi wireless charging

Combining TransferJet, NFC and Qi wireless charging
At Embedded World 2014, Toshiba will be demonstrating a Digital Kiosk which combines TransferJet, NFC and Qi wireless charging technology. In this example use case rich digital content, including HD video, can be quickly purchased and downloaded to mobile devices, such as smartphones.
6th January 2014

5GHz WLAN FEM extends IEEE 802.11a range

5GHz WLAN FEM extends IEEE 802.11a range
Designed for high data-rate mobile device applications, Microchip's SST11LF04 WLAN Front End Module (FEM) extends the range of IEEE 802.11a WLAN systems, while providing exceptional transmit power at the maximum 11ac high-data-rate modulation. Offered in one integrated, compact 2.5x2.5x0.4 mm, 16-pin QFN package, the FEM features a transmitter power amplifier, a receiver low-noise amplifier with bypass and a low-loss, single-pole two-throw antenna switch for 5GHz WLAN connectivity.
17th December 2013

Wireless relay enables 16 inputs from T24 devices

Wireless relay enables 16 inputs from T24 devices
Offering dual power relays capable of mains switching, Mantracourt's updated T24-RM1 wireless relay module allows 16 inputs from T24 wireless instrumentation devices. The module can also sum up to two groups of eight acquisition modules and provides new relay operation modes.
16th December 2013


Wireless documents


Network Headlines

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

 

WEBENCH® Designer