RF/Microwave

Displaying 1 - 10 of 928

RF sub-modules keep mobile devices small as WiFi speed increases

RF sub-modules keep mobile devices small as WiFi speed increases
  Murata has begun mass production of its LMFE3NFB-Jxx series RF sub-modules for WiFi applications. Using proprietary technology, the sub-modules feature a smaller front-end circuit in order to incorporate the WiFi function. 
26th April 2017

Aiding the testing of satellite communications

Aiding the testing of satellite communications
The launch of the Drone Payload Satellite Simulator, from RF and microwave components manufacturer AtlanTecRF, provides a transmit (Tx) to receive (Rx) loop-back in testing mostly compact and mobile satellite communications systems in-situ and without the need for connection via cables.
24th April 2017

High power RF switch family suits wireless applications

High power RF switch family suits wireless applications
CEL has announced the availability of CEL CG2409 family of high power RF switches. RF switches are microwave devices that route high frequency signals through transmission paths and can be used for diverse range of applications including WLAN, Mobile Communications, Wireless Security, Wireless Home Automation, Digital TV and many other RF products. The CG2409 is available in two packages X3 and M2.
21st April 2017


Miniature frequency synthesiser covers 0.5-20GHz range

Miniature frequency synthesiser covers 0.5-20GHz range
Global RF and microwave components and equipment manufacturer, AtlanTecRF, has announced the launch of the miniature 0.5-20.0GHz frequency synthesiser with GUI. Minimum set-up and easy operation are key features of the new, compact synthesiser, designated ASY-0050-2000, covering the full 0.5-20.0GHz range. In addition to the ultra broadband range the 2.5x2.5x1.1" housing has a 1KHz step size, ±0.5ppm frequency stability over a -10 to 70°C operating temperature range and RS485 control with easy-to-use GUI.
13th April 2017

IQ mixers feature RF & LO frequency bands from 4-38GHz

IQ mixers feature RF & LO frequency bands from 4-38GHz
Pasternack has released six IQ mixer models with RF and LO frequency bands ranging from 4 GHz to 38 GHz and In-Phase and Quadrature IF bandwidths ranging from DC to 4.5 GHz. Typical applications include point-to-point and point-to-multipoint radio, VSAT, Military Radar, EW, Satellite Communications, sensors, and test and measurement equipment.
11th April 2017

Inductors developed with Established Reliability rating

Inductors developed with Established Reliability rating
The introduction of the industry’s first off-the-shelf RF Surface Mount (SMT) Inductors with Established Reliability (ER) rating has been announced by Gowanda Electronics. The company claims these are the first-ever ER SMT series, and the Gowanda ER3013 was developed by Gowanda in response to a market need for surface mount options to the traditional leaded (thru-hole) designs.
4th April 2017

Analogue phase shifters use TTL logic interface for precise control

Analogue phase shifters use TTL logic interface for precise control
A supplier of on-demand microwave and RF components, Fairview Microwave, has introduced a series of 8-bit programmable phase shifters that are adjustable over a full 360° range. These three new models can produce a discrete set of phase states of up to 256 total steps in 1.4° increments with superior accuracy and minimal phase shift error.
29th March 2017

20W RF amplifier for electronic warfare markets

20W RF amplifier for electronic warfare markets
International Radio Frequency (RF) and Microwave solutions provider, NuWaves Engineering, has announced the development of their latest miniaturised C-band bidirectional amplifier (BDA) to their line of NuPower Xtender bidirectional amplifier products. The NuPower Xtender 06D05A BDA module, part number NW-BA-06D05A, follows the recent releases of both the C-Band Low Noise Amplifier (HILNATM CX) and the C-Band Power Amplifier (NuPowerTM 06D05A).
15th March 2017

External RF filters let you analyse signals on the go

External RF filters let you analyse signals on the go
In December 2016 Narda Safety Test Solutions released efficient external RF filters for its IDA 2 handheld signal analyser. These optional RF filters help users to in particular avoid out of band overmodulation without reducing the necessary measurement sensitivity when making measurements with the IDA 2 in highly dynamic measurement environments. These overmodulation effects can occur when very weak RF signals need to be measured in the presence of much stronger signals.
13th March 2017

NFC/RFID Tag ICs offer fast transfer mode

The advanced ST25DV dynamic-tag ICs are the latest addition to the ST25 NFC/RFID product family that come with a rich featured contactless RF interface and I2C bus. The dual-interface enables untethered interaction between an NFC-capable smartphone or an RFID reader and the host microcontroller located inside near-by equipment, such as smart meters, IoT devices, professional, or consumer products.
13th March 2017


RF/Microwave documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Industry of Things World 2017
18th September 2017
Germany Berlin Congress Center