Xilinx

Address:
Xilinx UK
Melita House
124 Bridge Road
Chertsey
KT16 8 LA
United Kingdom
KT16 8 LA
United Kingdom

Phone: Tel: 44 (0) 1932 574600

Fax: Fax: 44 (0) 1932 574601

Web: http://www.xilinx.com


Xilinx articles

Displaying 1 - 9 of 9

RFSoC architecture for 5G wireless applications

RFSoC architecture for 5G wireless applications
Provider of all programmable semiconductor products, Xilinx, has announced delivery of its Zynq UltraScale+ RFSoC family, an architecture integrating the RF signal chain into an SoC for 5G wireless, cable Remote-PHY, and radar. Based on 16nm UltraScale+ MPSoC architecture, the all programmable RFSoCs monolithically integrate RF data converters for up to 50-75% system power and footprint reduction, and soft-decision Forward Error Correction (SD-FEC) cores to meet 5G and DOCSIS 3.1 standards.
4th October 2017

RFSoC devices enable 50-75% power and footprint reduction

Xilinx has announced a disruptive integration and architectural breakthrough for 5G wireless with the infusion of RF-class analogue technology into its 16nm All Programmable MPSoCs.
22nd February 2017

Bringing security to the IIOT

Bringing security to the IIOT
Everything on the Industrial Internet of Things (IIOT) has a unique power fingerprint. Monitoring its changes with Zynq SoC modules can help to reduce cyber attacks. In the Industrial Internet of Things (IIoT) new security vulnerabilities emerge faster than companies can implement countermeasures. One of the most often overlooked vulnerabilities is the IIoT’s resource constrained hardware platforms.
6th January 2016


Small changes; big differences

As next-gen 5G systems will be complex to design, developers should seek out devices that have built-in functionality to help make the job easier.
5th January 2015

Xilinx unveil Zynq-7000

Xilinx unveil that at the middle of Mobilicom's new MCU-30 software-defined radio is Xilinx's Zynq-7030 All Programmable System-on-a-Chip, a member of Xilinx's Zynq-7000 family. Mobilicom's MCU-30 SDR is a very small, flexible, light-weight, battery-powered wireless radio that can be embedded into a wide variety of devices – from security cameras to public safety – to provide broadband connectivity for disaster relief, surveillance, military and other mission-critical applications.
17th July 2013

Xilinx Launches Fully Adaptive Gbps Class Point-to-Point Microwave Modem IP for Backhaul Applications

Xilinx announced today the availability of its new Gigabit class 1024QAM point-to-point microwave modem IP for backhaul applications. Designed with significant input from Tier 1 OEMs and powered by Xilinx's 28nm All Programmable devices, this modem solution represents a tremendous opportunity for wireless OEMs to incorporate differentiated, flexible and programmable capabilities in their cost-sensitive and performance-driven microwave backhaul platforms.
20th February 2013

Xilinx Acquire Wireless Backhaul Solutions Provider Modesat Communications

Xilinx today announced the acquisition of substantially all of the assets of Modesat Communications, a high performance wireless backhaul solutions provider with industry leading capabilities and roadmap. OEMs focusing on mobile backhaul platforms can now take advantage of Xilinx All Programmable 7 series FPGAs and Zynq-7000 SoCs combined with Modesat wireless backhaul solutions to gain market competitiveness and differentiation.
18th September 2012

Xilinx Kintex-7 FPGA Connectivity Kit for High Bandwidth Designs

Xilinx Kintex-7 FPGA Connectivity Kit for High Bandwidth Designs
Xilinx have revealed the availability of the Kintex-7 FPGA Connectivity Kit for customers creating advanced serial I/O designs across a broad range of high bandwidth applications. The Kintex-7 FPGA Connectivity Kit dramatically increases designer productivity by including a fully validated and supported reference design that integrates an entire PCIe solution with DDR3 sub-system, including both the HDL and the complete software stack.
16th July 2012

Xilinx Announces Key Connectivity IP Cores for Next Generation LTE and LTE-A Wireless Infrastructure Equipment

Xilinx, Inc. has announced the availability of three key connectivity IP cores that are vital for building programmable, flexible and cost effective 3G+/4G wireless base stations. Xilinx's Serial RapidIO Gen 2 v1.2 Endpoint LogiCORE™ IP, JESD204 v1.1 LogiCORE IP , and CPRI v4.1 LogiCORE IP all support connectivity standards and will help developers address design challenges in building new wireless equipment with higher system capacities.
21st November 2011


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Cyber Security - Oil, Gas, Power 2017
29th November 2017
United Kingdom London