Companies

TÜV SÜD

TÜV SÜD Articles

Displaying 1 - 20 of 33
Robotics
31st August 2023
Supporting Industry 4.0 readiness

While Industry 4.0 is a growing reality, much of it still remains a concept as the shift to this new method of working requires significant investment. While manufacturers’ understanding of Industry 4.0 and its potential value has grown steadily, many have not been able to translate that into workable transformation plans.

Wireless
8th June 2023
Wireless products get new EU security legislation

The Radio Equipment Directive (RED) is applicable to all electrical and electronic devices that intentionally emit and receive radio waves at frequencies below 3,000GHz, and it establishes a regulatory framework for placing radio equipment on the market.

Appointments
28th February 2023
TÜV SÜD UK’s machinery division appoints new chief engineer

TÜV SÜD UK’s machinery division has appointed Ian Wright as its new Chief Engineer.

Cyber Security
10th October 2022
Cybersecurity of IoT devices: Security by Design – the clock is ticking

The concept of Security by Design was developed to mitigate risks of cyber-attack. This principle can be applied to many different types of system, including individual sensors or devices, integrated operational technologies, and industrial processes.

Test & Measurement
30th August 2022
TÜV certifications for the TASKING VX-Toolset

The TASKING VX-Toolset for Tricore/AURIX v6.3r1 and the VX-Toolset for ARM Cortex-M v6.0r1 have obtained TÜV certification.

Robotics
23rd March 2022
Safety requirements for industrial robots

As the rise of human-robot collaboration expands the possibilities of automation, industry will integrate increasing numbers of robots factory-wide. Stewart Robinson MIET MInstMC, Principal Engineer and Functional Safety Expert at TÜV SÜD discusses here.

Test & Measurement
8th December 2021
UK EMC test facility have investment from £1.65m TÜV SÜD

TÜV SÜD is investing £1.65million in a 1,800m fully automated EMC and RF testing facility.

Industrial
20th July 2021
Filling the cyber security gap

The General Product Safety Directive 2001/95/EC (GPSD) covers the safety of any products that do not fall under other European Union (EU) Directives, largely serving as a general safety net. Craig Ormerod, Senior Manager at TÜV SÜD, explains.

Security
6th January 2021
IoT device security challenges

Joe Lomako, Business Development Manager (IoT) at TÜV SÜD, explains how to identify cyber weaknesses and mitigate against them.

Security
19th November 2020
Six cyber security trends for 2021

The ‘new normal’ is forcing companies to reconsider their existing plans, structures and processes and to seek out new solutions, including in cyber security. The experts from TÜV SÜD Sec-IT has kept companies and their IT security departments up to date with the important trends and developments to look out for next year. 

Latest
11th November 2020
TÜV SÜD UK launches UKCA Technical Advisory service

TÜV SÜD UK has launched a UKCA Technical Advisory service to help businesses meet the new conformity assessment requirements for goods being placed on the UK market from 1st January 2021. Although the UKCA mark will replace the EU’s CE marking, different rules apply to different products and UK nations.

Latest
26th October 2020
TÜV SÜD warns of new safety standard deadline

TÜV SÜD is warning manufacturers of ICT and AV Equipment that if they do not comply with a new safety standard (IEC 62368) within the next two months, they will no longer be able to sell their products in the EU.

Industrial
17th August 2020
Changes to EMC test approaches

Three years ago, an EMC emissions standard replaced others that the electronics industry had been familiar with for decades. It was hoped that these changes would make EMC emissions specification selection easier when testing equipment, but we still see some confusion. Richard Poate, Senior Manager at TÜV SÜD explains the changes to EMC test approaches.

Appointments
22nd July 2020
TÜV SÜD appoints Mary Grigsby as Head of Product Service

Mary joined TÜV SÜD 31 years ago, as a graduate in its EMC Service Line. Since then she has held various technical and managerial roles, most recently as Director of Test Operations. She has worked across a wide range of product sectors, including aerospace, consumer, electronics, medical and automotive.

Podcasts
2nd June 2020
Safety First podcast gives insights on cyber security

No doubt, during the corona crisis cyber attacks are on the rise. So, what should we all be prepared for? Together with Sam Curry, Chief Security Officer of Cybereason, we take a deep look into cyber security for 2020 and beyond

Medical
18th May 2020
Healthcare cyber security - safe and secure or an open door?

The Internet of Medical Things (IoMT) presents powerful opportunities for device manufacturers to develop new competitive advantages, as digitisation delivers increased efficiencies and unmatched flexibility, enabling real-time data access for medical practitioners to improve patient care. Richard Poate, Senior Manager at TÜV SÜD explains the issue of healthcare cyber security.

Security
21st April 2020
Cyber security and the IoT

Digitisation and the increasing connectivity provided by the Internet of Things (IoT) bring enormous opportunities, but also unforeseeable risks and serious vulnerabilities that can be exploited by new forms of cyber crime. Joe Lomako, Business Development Manager (IoT) at TÜV SÜD, explains the link between cyber security and the IoT.

Wireless
16th December 2019
IoT and the digital twin

Industry 4.0 or the Industrial Internet of Things (IIoT), describes the application of IoT in industrial processes and manufacturing. By implementing solutions related to big data, machine learning, digital twin, artificial intelligence (AI), predictive analytics etc., manufacturers aim to achieve the optimal level of responsiveness, adaptiveness and fully connected processes. Joe Lomako, Business Development Manager (IoT) at TÜV SÜD ex...

Medical
25th November 2019
Bringing notified body auditing and testing together

As the regulatory requirements of the global medical device market are complex and vary between regions, manufacturers are faced with increased product development costs and time to market challenges. Richard Poate of TÜV SÜD explains.

Test & Measurement
3rd September 2019
Aerospace fluid susceptibility test service launched

TÜV SÜD has launched its new fluid susceptibility test service, to help aerospace manufacturers determine whether materials used in equipment can tolerate the damaging effects of fluid contaminants. TÜV SÜD’s new fluid susceptibility test service will rigorously test aviation components to ensure they comply with the requirements of aerospace and defence standards. 

First Previous Page 1 of 2 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier