Companies

Pulse

Pulse Articles

Displaying 1 - 18 of 18
Power
22nd July 2014
Gate drive transformers have high potential of 2700VDC

Gate drive transformers, claimed to be suitable for high efficiency DC/DC converters, have been introduced by Pulse Electronics. The PG1427 series, which consists of the PG1427.001NL, PG1427.002NL, PG1427.003NL and the PG1427.004NL, has a high potential of 2700VDC and functional insulation between the gate and the drive windings.

Communications
12th June 2013
Pulse Electronics' New mLUX Translucent Flex Antenna Enables Innovative Industrial Designs

Pulse Electronics introduces the mLUX Translucent Flex Antenna, which enables more innovative, creative, and impressive design effects for mobile devices. The mLUX is an invisible antenna concept. It allows light and color to shine through the translucent device cover, offering multiple options for industrial design. When integrated into the display, the antenna enables increased use of metal on the back cover of the handset.

Communications
18th April 2013
Pulse Electronics Announces Catalog NFC Antennas

Pulse Electronics announces a new catalog selection of ferrite-loaded, stamp, and wire-on-carrier near field communication antennas. These products are ideal for integration into point-of-sale terminals, security and access control panels, transportation payment devices, and consumer electronics.

Communications
25th February 2013
Pulse Announces mCOMET Tunable LTE Antenna Delivering Best Performance For Ever Thinner Smartphones

Pulse Electronics has developed a tunable, co-located LTE antenna structure. The developed structure contains two Long Term Evolution Multiple Input, Multiple Output antennas in the same end of one device to provide 9 frequency bands of functionality in a volume of just 3.20 cubic centimeters. Called mCOMET, this tunable metal ring antenna configuration is for use in smart phones using RF chips with a two pole double throw antenna switch and meta...

Frequency
30th January 2013
Pulse Electronics Introduces Pin-In-Paste RF MoCA Filter Modules

Pulse Electronics introduces RF Multimedia over Cable Alliance filter modules that are pin-in-paste compatible. Pin-in-paste manufacturing uses a reflow instead of a wave soldering process to apply solder to the components, saving time, increasing throughput, and reducing costs. These filters are compliant with MoCA 1.1 and 2.0 requirements and are qualified with leading MoCA silicon vendors.

Communications
14th December 2012
Pulse Announce Higher Gain LTE NMO and Direct Mount Antennas

Pulse Electronics introduce a new line of Shadow Low Profile Transit NMO and direct mount antennas to support public safety, WLAN, smart grid/smart metering, 3G, and 4G applications including long term evolution. These high-performance, rugged, IP-67 rated antennas are provided in a slim, low profile radome of only 2.5 to 3 (63.5mm to 76.2mm) tall with a 1.5 (38.1mm) diameter base and high gains of 4 to 5.6 dBi.

Communications
30th August 2012
Ferrite Sheet Antenna for Near Field Communications

Pulse has today announced a near field communications antenna that enables mobile phones to read data from a distance of up to 40mm. The antenna sends and receives clear signals even when installed in a handset in close proximity to the battery or metal housing.

Communications
25th April 2012
Pulse Electronics Introduces Programmable Antenna to Enable LTE Connectivity in Ultra Thin Laptops

Pulse Electronics Corporation, introduces a high performance programmable antenna that enables LTE connectivity on mobile-connected laptop computers. The antenna can switch frequencies easily to accommodate both low and high operating bands. With a maximum height of 1mm, this low profile antenna fits the design of ultra thin laptops.

Analysis
3rd February 2012
Pulse Electronics Nominated for Global Mobile Award in the Best Technology Breakthrough Category

Pulse Electronics Corporation announces that it has been nominated for GSMA's 17th annual Global Mobile Awards 2012 in the Best Technology Breakthrough category. The nomination is for Indie--Operator Independent Hardware. Co-designed and optimized by EPCOS, a TDK group company, and incorporating a Pulse Electronics 3-feed antenna, Indie makes it possible to have truly global LTE smartphones and provides the single RF platform sought by the Next G...

Communications
7th December 2011
Pulse Electronics Introduces 3-Feed Antenna for Operator-Independent Global Roaming of LTE Mobile Devices

Pulse Electronics Corporation introduces a new 3-feed antenna that enables operator-independent global roaming capability for LTE mobile devices. Compatible with EPCOS RF front-end module (FEM) technology, it is the only antenna that has been proven to support 16 frequency bands, including Japanese frequency bands in the 1.5 GHz range.

Communications
17th October 2011
Pulse Electronics Introduces Low Profile 700-LTE Switchable Antenna for Tablets

Pulse Electronics Corporation introduces the first 700-LTE, high-performance, low profile antenna for LTE-enabled tablets. This switchable antenna for mobile connected PCs is only 1mm high. It enables 4 states for low band: 700-750MHz (LTE low), 750-790MHz (LTE high), 820-900MHz (GSM850), and 880-960MHz (GSM900), and covers 1800/1900/2100 for high band applications, with switching implemented directly from the device's display area.

Communications
7th September 2011
Pulse Electronics Introduces LTE Capability in Navigation Antennas

Pulse Electronics Corporation, a leading provider of electronic components, introduces its new vehicular mount antenna for long term evolution, 3G, 4G, WLAN, and GPS applications. The GPSDM700/2500FFS offers the best gain on the market over multiple frequency bands. Wider frequency bands (698-960/1710-2170/2300-2700/1575 MHz) are covered in one small, compact 3.5 (88.3mm) tall, 4.16 (105.7mm) diameter at base antenna. This antenna is ideal for vo...

Communications
20th July 2011
Pulse Electronics Introduces a Smart Antenna: Reliable downlink provides cost savings for network operators

Pulse Electronics Corporation introduces its new adaptive antenna concept. This smart antenna can be adapted for integration into devices that use an expanding spectrum of operating frequencies and enables faster data transmission rates in mobile phones, smart phones, and tablet devices.

Analysis
24th June 2011
Pulse Electronics' LDS Process Selected by Samsung to Enhance Design Flexibility and Performance for Mobile Devices

Pulse Electronics Corporation announces that its laser direct structuring (LDS) process was selected by Samsung Electronics Co, Ltd. for producing three-dimensional antennas to be incorporated into future Samsung products that use an antenna.

Communications
24th June 2011
Pulse Electronics Offers a Cost-Effective LDS Antenna Manufacturing Process Provides a Flexible, High-Performance LDS Antenna Option for Laptops and Tablets

Pulse Electronics Corporation has introduced its new laser direct structuring (LDS) antenna lasering process for antenna parts which are too long or large to fit well in conventional laser machines.

Communications
12th April 2011
Pulse Electronics Introduces an Ultra-Thin Antenna with GPS and 3G Functionality

Pulse Electronics Corporation (NYSE: PULS), a leading provider of electronic components, introduces its new ultra-thin, active global positioning system (GPS) antenna with Global 3G functionality including GPRS, GSM, UMTS, and WCDMA.

Wireless
9th July 2010
Pulse Announces Low Cost, Weatherproof Antennas for 2.4 GHz Applications

Pulse introduces its new low cost, weatherproof antennas for 2.4 GHz devices used in industrial, smart grid metering, security, broadband access, and other machine-to-machine(M2M) applications. These robust, high-efficiency, compact antennas meet Bluetooth, WLAN, WiFi, IEEE 802.11b/g, ZigBee IEEE 802.15.4, and 2.4 GHz ISM band system standards.

Wireless
9th July 2010
Pulse IP67-Rated Penta-Band + GPS Antenna for Telematics

Pulse introduces its W4120 Series of multi-band active GPS antennas that combines compact size with the capability to support most major wireless services globally. This low-cost antenna features a low-profile housing that complies with Ingress Protection 67, making it suitable for outdoor use. The active GPS antenna provides accurate location-based information that can be communicated back to the tracking location via commonly used wireless f...

First Previous Page 1 of 1 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier