AtlanTecRF

Address:
40a Springwood Drive
Braintree
Essex
CM7 2YN
United Kingdom

Phone: +44 (0)1376 550220

Fax: +44 (0) 1376 552145


AtlanTecRF articles

Displaying 1 - 20 of 28

Broadband amplifier covers 50MHz–20GHz frequency range

Broadband amplifier covers 50MHz–20GHz frequency range
Global RF and microwave components and equipment manufacturer, AtlanTecRF, has launched a new Ultra Broadband Amplifier, covering the 50MHz–20GHz frequency range in a single unit. This 25dB gain block delivers up to 18dB at 1dB compression and yet has a typical noise figure of just 1.8dB, thereby making it an all round, general purpose amplifier with applications in test measurement, electronic countermeasures and scientific research as well as a whole range of communication equipment.
1st September 2017

Ultra broadband digital attenuator can handle up to 25dBm

Ultra broadband digital attenuator can handle up to 25dBm
Global RF and microwave components and equipment manufacturer, AtlanTecRF, has launched its latest Ultra Broadband 500MHz to 20GHz Digitally Controlled PIN Attenuator. This new product is part of AtlanTecRF’s range of ultra broadband microwave components and sub-systems designed for wide ranging applications in test and measurement, electronic countermeasures, scientific research and general communications.
17th August 2017

Ethernet controllable LTTs come in portable bench instruments

Ethernet controllable LTTs come in portable bench instruments
AtlanTecRF has announced the launch of its new BLR series of ethernet controllable LTTs (loop test translators) in convenient bench instruments. With models designed for operation in both Ku and Ka bands, these portable items of satcom test kit can be easily transported to the test location and set up for either local operation or remote operation via ethernet with a GUI.
5th July 2017


Update in satcom RF packaging suits automatic test systems

Update in satcom RF packaging suits automatic test systems
AtlanTecRF has launched a new plug-in 6U Loop Test Translator (LTT) for satcom RF testing. The traditional configuration for loop test translators used in off-satellite set up, calibration, alignment and quality monitoring of ground based equipment in satcom terminals is the 19” x 1U rack mount chassis. In other applications, however, such as automatic test systems used in the manufacture of satellite terminals such packaging does not deliver optimum equipment densities or ease of operation.
13th June 2017

Aiding the testing of satellite communications

Aiding the testing of satellite communications
The launch of the Drone Payload Satellite Simulator, from RF and microwave components manufacturer AtlanTecRF, provides a transmit (Tx) to receive (Rx) loop-back in testing mostly compact and mobile satellite communications systems in-situ and without the need for connection via cables.
24th April 2017

Miniature frequency synthesiser covers 0.5-20GHz range

Miniature frequency synthesiser covers 0.5-20GHz range
Global RF and microwave components and equipment manufacturer, AtlanTecRF, has announced the launch of the miniature 0.5-20.0GHz frequency synthesiser with GUI. Minimum set-up and easy operation are key features of the new, compact synthesiser, designated ASY-0050-2000, covering the full 0.5-20.0GHz range. In addition to the ultra broadband range the 2.5x2.5x1.1" housing has a 1KHz step size, ±0.5ppm frequency stability over a -10 to 70°C operating temperature range and RS485 control with easy-to-use GUI.
13th April 2017

Testing SNG and outside broadcast equipment off-satellite

Testing SNG and outside broadcast equipment off-satellite
AtlanTecRF launched its SNG series of Satellite Simulator Systems, designed to provide a loop-back test for vehicle mounted Ku band satellite news gathering (SNG) antennas without the need to access the satellite. Comprised of two units, the satellite simulator is either depot based or portable thereby facilitating the testing and calibration of news gathering and outside broadcast systems off-satellite.
8th March 2017

Cable assembly range offers 83% velocity propagation

Cable assembly range offers 83% velocity propagation
  AtlanTecRF has announced the latest addition to its range of high performance cable assemblies. The ACH series of high velocity products is available in frequency ranges of DC-18GHz, DC-26.5GHz, DC-40GHz and DC-50GHz. 
9th February 2017

Satcom signal generator offers versatility in frequency and level control

AtlanTecRF has launched a new Ethernet Controlled Signal Generator. Designed to provide a built-in signal source for satellite communications approved installations as well as general purpose and production line testing, the new AtlanTecRF ESG Series of Signal Generators offers ethernet control for output frequencies covering all bands including L, S, C, X, Ku, Ka and Q.
24th October 2016

Broadband noise generators can be controlled via Ethernet

Broadband noise generators can be controlled via Ethernet
AtlanTecRF has introduced its RNG range of 19 broadband noise generators featuring Ethernet control. Designed to form a built-in test facility in permanent installations of communications equipment or production test set-ups, these high output instruments operate in frequency ranges starting at 10Hz and continuing up to 18GHz in standard configurations with a capability to 40GHz and beyond for custom applications.
19th August 2016

AtlanTecRF launches a ‘build your own amplifier’ web tool

AtlanTecRF has launched an easy to use ‘build your own amplifier’ web tool. The tool is designed to take customers through a series of questions to help them easily specify and customise their amplifier requirements. Customising products can be time consuming and often result in the customer and manufacturer needing to gather additional information before a final specification is completed.
16th June 2016

Portable loop test translator handles wet weather

A ruggedised version of its Portable Loop Test Translator has been launched by AtlanTecRF.  Taking the portability of RF satellite communications a step further, the LRU series of Loop Test Translators come in a high visibility ruggedised housing and are designed specifically for antenna site range and other field applications.
9th March 2016

Game changing technology for satellite communications

Game changing technology for satellite communications
This week’s Satellite 2016 exhibition in Washington DC has seen AtlanTecRF launch its new Ka Band Satellite Simulator. Testing of mobile satellite communications systems has received a further boost with the launch of AtlanTecRF’s LSS range of ‘game-changing’ Satellite Simulators designed for operation in Ka band with optional use in other bands, including Ku and DBS.
9th March 2016

Satcomms test loop translators target X-band

Satcomms test loop translators target X-band
  A series of satcomms test loop translators for use in X-band has been released by AtlanTecRF. The devices provide direct frequency conversion either from Tx to Rx, Tx to L-band or from L-band to Rx in the nominal frequency ranges of 7.9-8.4GHz Tx and 7.25-7.75GHz Rx.
1st May 2015

Signal generator features digital connectivity

Signal generator features digital connectivity
A miniature signal generator, which combines outstanding RF performance, digital connectivity and operational versatility in a 21x72x100mm package, has been introduced by AtlanTecRF. The ASG generator features a wide frequency range of 25-6000MHz, which is tuneable in 1KHz steps. Phase noise at an output frequency of 1GHz is better than -106dBc/Hz at an offset of 100KHz from the carrier, while spurious is typically lower than -70dBc and harmonics less than -25dBc.
12th March 2015

8-2300MHz divider specifically targets satcom applications

8-2300MHz divider specifically targets satcom applications
Designed specifically for satellite communications IF and reference bands, the BPR-008-2300-2 power divider has been introduced by AtlanTecRF. The resistive two way coaxial power divider has an operating frequency range from 8MHz to 2300MHz, which makes the device suitable for the transmission of L-Band signals as well as the popular 10MHz reference frequency.
9th July 2014

PIN attenuators cover 500MHz to 40GHz frequencies

PIN attenuators cover 500MHz to 40GHz frequencies
Covering frequencies from 500MHz to 40GHz, AtlanTecRF's first range of digitally controlled PIN Attenuators are available in 17 models.
15th January 2014

50GHz Bias Tees enable co-habitation of coaxial lines

50GHz Bias Tees enable co-habitation of coaxial lines
Bias Tees provide a link in utilising a single coaxial cable to carry both RF signals and DC power, and with the recently announced ABT series from AtlanTecRF, this capability can now be provided for systems operating at frequencies up to 50GHz.
16th December 2013

Miniature PIN switch covers 1.0 to 18.0 GHz frequency range

Miniature PIN switch covers 1.0 to 18.0 GHz frequency range
AtlanTecRF have today announced two models of ultra wide band miniature PIN switch, each covering the entire 1.0 to 18.0 GHz frequency range. Both absorptive types, the SPST and SP2T switches deliver in excess of 70dB isolation while maintaining VSWR better than 2.0:1.  
20th November 2013

Versatile Series of Coaxial DC Blocks to 40 GHz

AtlanTecRF has introduced a new series of coaxial DC Blocks which are designed to provide the RF/Microwave communication systems engineer with versatile solutions in dealing with the presence of DC power on coaxial signal cables. With frequency ranges from 10 MHz to 40 GHz these small devices allow RF/microwave signals to pass with minimum insertion loss while blocking any DC present.
27th June 2013


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Cyber Security - Oil, Gas, Power 2017
29th November 2017
United Kingdom London